Cost to Build a Deck in Nevada (2026)
A 12×16 ft deck in Nevada runs about $4,485 in pressure-treated pine and $9,709 in composite, installed — 6% above the US average. Here is what moves that number in Nevada, with a calculator priced for the state.
Pressure-treated pine
$21–$27 /sq ft
Cedar
$30–$39 /sq ft
Composite
$45–$58 /sq ft
Deck cost calculator for Nevada
Priced with Nevada labour, material and footing-depth factors. Change any input and the estimate updates.
Estimated installed cost
$8,544 – $11,165
192 sq ft · about $50.57/sq ft
- Materials
- $6,037
- Labour
- $3,671
- Footings (21 in deep)
- 3 × about $157
- Frost-depth adjustment
- −$29
Mid-range estimate for a rectangular deck attached to the house, with one beam line per 12 ft of depth and footings every 8 ft. Excludes demolition, permits and site work. For railing, stairs and a full line-item breakdown use the main deck cost calculator.
Nevada deck cost by size and material
Mid-range installed prices for a standard-height deck attached to the house, including framing, footings at the local depth and hardware. Railing and stairs are priced separately in the main deck cost calculator.
| Deck size | Pressure-treated pine | Cedar | Composite |
|---|---|---|---|
| 10 × 10 ft (100 sq ft) | $2,322 | $3,368 | $5,043 |
| 12 × 12 ft (144 sq ft) | $3,356 | $4,863 | $7,274 |
| 12 × 16 ft (192 sq ft) | $4,485 | $6,493 | $9,709 |
| 16 × 20 ft (320 sq ft) | $7,445 | $10,793 | $16,153 |
| 20 × 20 ft (400 sq ft) | $9,326 | $13,510 | $20,210 |
What drives deck prices in Nevada
Labour
Labour is the biggest regional variable. Carpentry labour in Nevada runs 10% above the national level, so a composite 12×16 that averages $9,216 nationally comes to about $9,709 here. On pressure-treated decks labour is more than half the bill, so the regional gap is widest on the cheapest material.
Climate
Desert sun and heat in the south, cold winters and snow in the north. UV and dryness age wood fast.
Footings and frost depth
Footings in Nevada typically go 12–30 inches deep. At 21 inches each 12 inch footing costs roughly $157 installed, and a 12×16 deck needs about 3 of them — a saving of $29 against the 24 inch depth national prices assume.
Which decking makes sense here
Our pick for most Nevada homes: composite. UV and heat mean wood needs refinishing very often; a light, heat-mitigating composite lasts. Composite adds about $5,224 to a 12×16 deck over pressure-treated — see the full 20-year comparison in the composite vs wood calculator.
Permits and code in Nevada
Clark County and Washoe County enforce the IRC with local amendments. Caliche soil in the Las Vegas valley can make footing holes slow and expensive to dig.
Typical deck permit fees: $150–$500. Expect a footing inspection before concrete, a framing inspection before the decking goes down and a final. Estimate your fee with the deck permit cost calculator, and read our deck permit guide for what the drawings need to show.
Best time to build a deck in Nevada
October to April in Las Vegas; May to October around Reno.
Deck cost in Nevada cities
- Las Vegas — 12×16 composite about $9,680
Compare neighbouring states
- California — 12×16 pressure-treated about $4,969 (+16% vs US)
- Arizona — 12×16 pressure-treated about $4,117 (−0% vs US)
- Utah — 12×16 pressure-treated about $4,302 (+0% vs US)
- Idaho — 12×16 pressure-treated about $4,096 (−5% vs US)
- Oregon — 12×16 pressure-treated about $4,515 (+5% vs US)
Frequently asked questions
How much does it cost to build a deck in Nevada?
A typical 12×16 ft (192 sq ft) deck in Nevada costs about $4,485 installed in pressure-treated pine, $6,493 in cedar and $9,709 in composite. That is $21–$27 per square foot for pressure-treated and $45–$58 for composite — 6% above the US average.
Is a composite deck worth it in Nevada?
On a 12×16 deck composite costs about $5,224 more than pressure-treated up front. UV and heat mean wood needs refinishing very often; a light, heat-mitigating composite lasts. Composite needs no staining, which saves a refinishing cycle every two to three years on wood.
Do I need a permit to build a deck in Nevada?
Clark County and Washoe County enforce the IRC with local amendments. Caliche soil in the Las Vegas valley can make footing holes slow and expensive to dig. Where a permit is required, fees typically run $150–$500. Under the model residential code, a freestanding deck under 200 sq ft and no more than 30 inches above grade that does not serve an exit door is often exempt — attaching it to the house removes that exemption.
How deep do deck footings need to be in Nevada?
Typically 12 to 30 inches depending on the part of the state. At about 21 inches, each 12 inch footing costs roughly $157 installed, compared with $167 at a 24 inch depth. Confirm the exact depth with your building department before digging.
When is the best time to build a deck in Nevada?
October to April in Las Vegas; May to October around Reno. Booking a builder outside the spring rush often gets a faster start date and a keener price.
Is Nevada expensive for deck building compared with other states?
Nevada ranks 39 of 50 from cheapest to most expensive on our index. Carpentry labour runs 10% above the national level and materials 3% above it, which puts a typical deck 6% above the US average.
Price the rest of the project
How these figures are made: national installed prices per square foot, split into materials and labour and adjusted by a Nevada labour index (reasoned from BLS state carpenter wage data), a material and freight index, and the local footing depth. They are planning estimates — get two or three itemised local quotes. Method.